13.5" double bend PLAIN Chrome Stick 6900 for Hurst shifters Chevy Truck Jeep CJ

Description: PLAIN chrome shifter stick #6900: 13.5" tall, bends ~3.5" forward and then curves back to end with knob above stubSee also similar sticks #4331 (3" taller) & #7236 (2.5" shorter)3/8"-16 knob threadsForged mild steel - case-hardened for toughness, chrome-plated for beautyPLAIN sides - NO LOGO - NOT a Hurst part! Mating serrations for Hurst stub mount are stamped into left side WARNING: Do not weld, bend, or modify a case-hardened part like this as it will create a weak spot that can lead to catastrophic failureGreat for custom installations - measure before you buy! Mounts via 3/8" bolt holes spaced 7/8" apart - fits any aftermarket Hurst stubMany off-brand shifters use 8mm stick bolts - requiring special adapter bolts Mix parts carefully as proper leverage ratio (throw length) requires matching stick length to stub fulcrum height Stick length = 13.5" (distance from mount to knob) - see swap bases for fulcrum optionsInterchanges with Hurst #5386900 IF YOU ARE DOING A SWAP - application info is irrelevant once transmission is changed - sit in vehicle with tape measure while studying Hurst catalog - stick section. This stick fits the following external linkage Hurst shifters for OE 4 speed transmissions - correct fitment requires the specified Hurst base & installation kit (see Hurst catalog): 3666901 for 1966-1970 Chevy Full Size car w/ 3 speed3666901 for 1958-1965 Pontiac Full Size car w/ 3 speed3666901 for 1969-1977 Chevy Truck (4x4) w/ 3 speed3666901 for 1971-1975 Dodge & Plymouth Van w/ 3 speed3666901 for many 1952-1977 Ford & Mercury car & truck w/ 3 speed3916901 (unknown, may be misprint)3918403 (unknown)3918404 (unknown) NOTE: These part numbers may be specific to the transmission, engine, or interior trim (console etc) and may not fit all models mentioned. Intended for aftermarket Hurst shifters - most OE factory shifters from this era (including Hurst) are NOT compatible with a bolt-on stick; they use a different connection. This stick also fits the following Hurst & Core internal rail shifters - matching base required, not compatible with stock shifters (see complete kits): 3912006 Blackjack shifter for 1955-1957 Chevy w/ TKO3913007 Blackjack shifter for 1955-1957 Chevy w/ Magnum3915045 for 1982-1986 Jeep CJ w/ T4 or T5

Price: 69.95 USD

Location: Brentwood, Tennessee

End Time: 2024-08-14T23:19:46.000Z

Shipping Cost: 10.6 USD