Axial 1/10 Scale SCX10 III Jeep JLU Wrangler Kit

Description: Axial SCX10 III - Portals, Dig, 2-Speed & Jeep Wrangler JL Body The Axial SCX10 III Jeep JL Wrangler incorporates the key components that have made the Axial SCX10 series successful - but takes realism and detail to a higher level. The SCX10 III includes a replica V8 engine to house the front-mounted 540 motor. It's mated to a realistic transmission housing and transfer case, just like a 1:1 vehicle. The unique and versatile transmission can be built in several ways. If using a 3-channel radio, you can set it up with a third-channel DIG function that lets you lock the rear axle from the transmitter for front wheel drive and a tighter turning radius. Another 3-channel option is to set up the vehicle with a two-speed transmission to select between high and low speeds. To have access to the two-speed transmission and DIG function simultaneously, just add another servo and use a radio with at least four channels! The SCX10 III Jeep JL Wrangler kit features portal axles to improve performance by increasing the ground clearance at the pumpkin, while reducing torque twist. Its standard battery tray accepts full-size standard LiPo or NiMH packs. There's also space on the side rails for drivers who prefer "shorty" packs. Inner fenders and floor sides hide the internal components that hinder the scale look. To top off the chassis, the kit comes with a clear Jeep Wrangler Unlimited four-door body that's ready for finishing however you like. Scale details include a roll cage, front hood vents and cowl, windshield wipers, mirrors, door handles and more, plus a detailed interior. New taller and wider, officially licensed Nitto Trail Grappler tires on 3-piece licensed KMC Machete beadlock wheels add more scale realism and more grip on dirt, rocks, and all other off-road trails. NOTE: Finished kit shown in photos is for illustrative purposes only. See needed to complete list below for a full list of items required to complete the model. Features: Replica V8 engine, transmission housing and transfer case cover and protect the motor while improving scale appearanceChassis tray accepts full-size, standard LiPo or NiMH batteries, with space on the side rails for running small pack sizesDIG function transmission setup lets you lock the rear axle from the transmitter for front wheel drive and a tighter turning radiusTwo-speed transmission setup option also available for high and low speedsPortal axles increase ground clearance and reduce torque twistAdjustable wheelbase chassis allows each driver to choose the size of their chassisInner fenders and floor sides hide internal components usually visible from the side of the chassisLicensed KMC Machete 3-piece beadlock wheels provide scale looks and let you remove and replace tires without gluingOfficially licensed Nitto Trail Grappler tires in a taller and wider size increase ground clearance and gripFully rebuildable, oil-filled shocks include hard anodized, threaded shock bodies, coilover springs, and an emulsion-style cap with screw for easier rebuildsClear scale Jeep® Wrangler Unlimited body with detailed interior Specifications: Approximate Assembly Time: 7-10 HoursBall Bearings: Complete setBatteries: Sold separatelyBody: Clear polycarbonate Jeep Wrangler Unlimited with detailed interiorBrakes: Integral with ESCBushing Material: MetalCharger: Sold separatelyChassis: Adjustable steel C-channelCompletion Level: KitDifferential: LockedDrivetrain: 4WDFinal Drive Ratio: 45.6:1Gear Pitch: 32-PitchGround Clearance: 3 in (76.2mm)Height: 9.5 in (241mm)Length: 19.125 in (485mm)Max Battery Dimensions: 5.47 x 1.85 x 0.98 in (139 x 47 x 25mm)Motor Size: 540 (sold separately)Motor Type: Brushed (sold separately)Pinion: 14TRadio: Sold separatelyScale: 1/10Servos: Sold separatelyShock Type: Oil-filled coil over springSpeed Control: Sold separatelySpur Gear: 40TSuspension: Multi-link solid axleTire Compound: R30Tire Diameter: 4.7 in (119mm)Tire Tread: Nitto Trail Grappler M/TTrack: Front and Rear 8.9" (226mm) distance from outer edges of tires measured side to sideVehicle Type: Scale 4WD CrawlerWater-Resistant: YesWeight: 6.5 lbs (2.9kg)Wheel Diameter: 1.9 in (48.3mm)Wheel Hex Size: 12mmWheel Type: Injection molded 3-piece beadlock 1.9 KMC MacheteWheel Width: 1 in (25.5mm)Wheelbase: 12.3 in (312mm)Width: 9.25 in (234mm) Includes: (1) Axial® SCX10™ III Jeep® JL Wrangler 4WD Kit with clear body(1) Product Manual Needed to Complete: 4-Channel transmitter & receiver (recommended)Steering servoESC (electronic speed controller)Electric motorMicro servo for rear dig featureMicro servo for 2-speed featureBattery (accepts standard and shorty packs)Battery chargerPaint (for polycarbonate plastic)

Price: 349.99 USD

Location: Great Falls, Montana

End Time: 2025-01-03T21:08:23.000Z

Shipping Cost: N/A USD