Grundfos 1.5HP Motor 230 Volt w/ Single Stage SS Shaft 217.56 psi

Description: Grundfos 1.5HP Motor 230 Volt w/ Single Stage SS Shaft 217.56 psi. Specifications Product nameMS 402Product No.79952105EAN5700390663056Price Technical Shaft seal for motorLIPSEALApprovals on nameplateCE,EAC,CSACOMP,URModelBMotor versionT40 Specifications Product nameMS 402 Product No.79952105 EAN5700390663056 Price Technical Shaft seal for motorLIPSEAL Approvals on nameplateCE,EAC,CSACOMP,UR ModelB Motor versionT40 Materials MotorStainless steel DIN W.-Nr. 1.4301 AISI 304 Installation Maximum ambient pressure217.56 psi Motor diameter4 inch Staybolt5/16-24 UNF Liquid Max liquid temperature at 0.15 m/sec104 F Electrical data Motor typeMS402 Type of motorRSIR Rated power - P21.5 HP KVA codeL Main frequency60 Hz Rated voltage1 x 230 V Voltage tolerance+10/-10 % Service factor1.30 Rated current13.1 A Maximum current consumption13.1 A Starting current620 % Cos phi - power factor0.85 Rated speed3450 rpm Rated full-load torque3.002 ft lb Locked-rotor torque80 % Breakdown torque200 % Moment of inertia0.019 lb ft Axial load max772 lb Start. methoddirect-on-line Enclosure class (IEC 34-5)IP68 Insulation class (IEC 85)B Motor protectionCONTACT Thermal protecinternal Built-in temperature transmitterNo R a1.88 ohm WindingsEnamelled Quotation MS 402 Phase: The motor is a 1-phase motor of the canned type with a sand shield, liquid-lubricated bearings and pressure-equalizing diaphragm. LIQUID: Max liquid temperature at 0.15 m/sec: 104 F TECHNICAL: Shaft seal for motor: LIPSEAL Approvals on nameplate: CE,EAC,CSACOMP,UR Motor version: T40 MATERIALS: Motor: Stainless steel DIN W.-Nr. 1.4301 AISI 304 INSTALLATION: Maximum ambient pressure: 217.56 psi Motor diameter: 4 inch ELECTRICAL DATA: Motor type: MS402 Type of motor: RSIR Rated power - P2: 1.5 HP Main frequency: 60 Hz Rated voltage: 1 x 230 V Voltage tolerance: +10/-10 % Service factor: 1.30 Rated current: 13.1 A Maximum current consumption: 13.1 A Starting current: 620 % Cos phi - power factor: 0.85 Rated speed: 3450 rpm Rated full-load torque: 3.002 ft lb Locked-rotor torque: 80 % Breakdown torque: 200 % Moment of inertia: 0.019 lb ft Start. method: direct-on-line Enclosure class (IEC 34-5): IP68 Insulation class (IEC 85): B Built-in temperature transmitter: No Windings: Enamelled

Price: 225 USD

Location: Charlotte, North Carolina

End Time: 2023-12-25T06:50:51.000Z

Shipping Cost: 0 USD