Description: USE INSTRUCTIONS:1.Failure to follow all instructions and limitations concerning the use of the respirator and/or failure to wear the respirator for the whole duration of exposure to contaminants can seriously reduce the performance characteristics of the respirator and lead to illness, injury or death.2.Discard the respirator and replace with a new one if: *excessive clogging of the respirator causes breathing difficulty. *the respirator becomes damaged.3.Visually inspect the filtering facepiece prior to each use to assure that there are no holes in the breathing zone, especially around the weld attachment of the headbands to insure no damage has occurred. Discard respirator if any visual signs of holes or damage.4.Leave the contaminated area if dizziness, irritation or other distress occurs. USE LIMITATIONS:1.Do NOT use the respirator or enter or stay in a contaminated area under the following circumstances:*Atmosphere contains less than 19.5% oxygen*Atmosphere contains oil aerosols*For protection against gases or vapors*Contaminants or their concentrations are unknown or immediately dangerous to life or health*Concentrations or contaminants exceed maximum use concentrations in applicable OSHA standards or applicable government regulations or 10 times the PEL(Permissible Exposure Limit),whichever is lower*For sandblasting, paint-spray operations,asbestos2.Do NOT modify or misuse the respirator.3.Do NOT use the respirator with beards or other facial hair that interferes with direct contact between the face and the edge of the respirator, or any other conditions that may prevent a good face-seal. Follow these instructions each time respirator is worn.1.Cup the respirator in the hand, allowing the head straps to hang freely.2.Hold the respirator under the chin with the nosepiece facing outwards. Place the lower head strap around the neck below the ears.3.Holding the respirator against the face with one hand, place the top head strap above the ears, around the crown of the head.4.Place hands on each side of the respirator and move slightly right,left,up and down, to adjust the position of the respirator and achieve the most optimal fit on the face. FIT-CHECK THE FACE-SEAL AS FOLLOWS1.Place both hands over the respirator-do not disturb the position of the respirator;2.Inhale sharply (a negative pressure should be felt inside the respirator);3.If you detect air-leaks,readjust the head straps and/or the nose-piece.WARNING: If you cannot achieve satisfactory fit, do NOT enter the contaminated area. STORAGE1.The respirator should be stored at the area which is well-ventilated, avoids direct sun exposure and dry area.Keep away from fire and pollution.2.Storage temperature range is-20℃(-4℉) to 38℃(100.4℉). Maximum Relative Humidity <80%.3.Best before:maximum 3 years after produced.
Price: 25.99 USD
Location: Ontario, California
End Time: 2024-10-07T05:53:05.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Brand: Honeywell
Model: N95
MPN: H910 Plus
