Description: MRCARTOOL V310 GDIInjector Cleaner is an efficient and professional cleaning device designed for the injectors of GDI petrol direct injection engines. It adopts advanced cleaning technology that can deeply clean the carbon and impurities inside the injector nozzles to ensure the smooth running of the engine. With 12V/70V/120V voltage options, it is more powerful and practical, and at the same time, the cleaner is easy to use, safe and reliable, and suitable for all kinds of maintenance and repair scenarios, providing a strong guarantee for improving vehicle performance and extending engine life. FUEL INJECTOR TEST It can simulate a variety of working conditions andcomprehensively test the performance of the injectors. Intelligent diagnosis and operation is applicable to a wide range of car models, strong cleaning ability, easy to learn the operation, pressure regulation control technology, stable oil pressure, adjustable range, can be arbitrarily adjusted injector test time, working frequency, the number of times of injection and so on.Cylinder Volume: 140ml Six injectors can be tested simultaneously. By comparing and observing, the injector streamlining can be better evaluated. The bright background light design allows for clear real-time observation of the injector's condition.The tank has a capacity of 2000ml. By using ultrasonic signal oscillation, it can thoroughly remove any internal build-up in various injectors. The large-capacity design allows for the simultaneous cleaning of up to six injectors, significantly improving work efficiency and saving time.Equipped with a 3.2-inch colour screen display, this device allows for easy monitoring of its working status. Additionally, the injector test time, working frequency, injection time, and minimum switching cycle can be adjusted to meet your specific needs.Ultrasonic cleaning Adopting professionally designed cleaning procedures and technologies, it can quickly and thoroughly remove carbon and oil stains inside GDI injectors, ensuring smooth and unobstructed injectors and improving fuel injection efficiency. Intelligent diagnosis and operation The cleaner is equipped with an intelligent diagnostic system, which can quickly detect the working status of the injectors and provide precise guidance for the cleaning operation. At the same time, the operation interface is simple and intuitive, allowing users to quickly and efficiently complete the cleaning operation.Injector Voltage Selection Our latest GDI injector driver software offers multiple voltage outputs (12V, 70V, and 120V) and is compatible with a wide range of GDI engine models. This ensures that it can meet the cleaning needs of different car models. Injector Voltage Selection: Our latest GDI injector driver software offers multiple voltage outputs (12V, 70V, and 120V) and is compatible with a wide range of GDI engine models. This ensures that it can meet the cleaning needs of different car models. Upgrade Design The pressure gauge can be used to observe injector pressure during testing. The equipment is also equipped with a drain valve for recycling cleaning fluid, a test fluid tube for real-time display of the amount of cleaning fluid, and a graduated glass tube for displaying the current test fluid level and injector test injection status.Powerful Compatibility The product is highly compatible with over 98% of petrol and motorbike injectors available on the market, including GDI, EFI, and FSI injectors. It is also compatible with direct injection engines from Mercedes-Benz, BMW, Audi, Porsche, Ford, and other manufacturers. Technical Parameters:Range Of Rotation: 0-7500r/minPWM Pulse Width: 0～20.0ms step 0.1msCleaning Frequency: 40kHzInjection Times: 0～9900times, step 100msSystem Pressure: 0～0.6MpaUltrasonic Cleaning Power: 70WPackage Dimensions: 340*295*360mmPower Supply: AC 110/220V±10%Frequency: 50HZ±0.5Relative Humidity: <85%Environment Temperature: 0℃～＋40℃External Magnetic Field Strength: <400A/mNo Open Flames Are Allowed: AroundSTORAGETurn off the power and unplug the power plug. Put all connectors back into the accessory box for storage. Drain the ultrasonic cleaning agent. Wipe the equipment clean with a dry soft cloth. If the machine needs to be stored for a long time, discharge the testing agent into a bottle and seal it.Main parts: Main body of the cleaning machine: contains core parts such as cleaning liquid circulation system, high pressure pump, control system and so on. Cleaning fluid storage tank: Used to store the cleaning fluid to ensure a continuous and stable supply of cleaning fluid. Injector nozzle adapter: Various models are available to adapt to different brands and models of GDI injectorsMRCARTOOL V309 GDI Car and Motorcycle Injector Cleaner and Tester is suitable for four-cylinder vehicles, 12V 70V 120V working voltage regulation, cleaning can help you clean the carbon in the fuel system, as well as gasoline combustion caused by the injector caused by other impurities, and test the injection amount of the cleaned injector, to achieve a thorough cleaning of the nozzles and the improvement of the performance of the vehicle.Powerful Features Ultrasonic cleaning: for single or multiple injectors at the same time, compatible with standard injectors, GDI injectors, EFI injectors, FSI injectors, etc.,. Injector test: It can simulate various working conditions and test the performance of injectors comprehensively.Uniformity Detection: Supports detecting the uniformity of injection volume for each injector.Atomization observation: The background light allows you to clearly observe the spray atomization of the nozzle.Sealability Test: Allows you to detect the sealing and dripping of fuel injectors under high pressure.COMPARISON TEST Four injectors can be tested at the same time, which can facilitate comparison and observation, so as to better diagnose the condition of the injectors.ULTRASONIC CLEANING It can perform ultrasonic cleaning on single ormultiple injectors simultaneously, as well as can removebuildup thoroughly on the internal injector and its accessories.INJECTOR VOLTAGE SELECTION Select the right injector voltage for cleaning or testing according to the injector type.FOR VARIOUS FUEL INJECTORS It can clean and test not only standard injectors but also GDI injectors, such as for Mercedes-Benz, BMW, Audi, Porsche, Ford, and other direct injection engines.INTELLIGENT OPERATION MODE: The cleaner is equipped with an intelligent control system with a simple and intuitive operating interface. Users only need to follow the prompts to operate, you can easily complete the cleaning task. At the same time, the intelligent system can monitor the progress and effect of cleaning to ensure the safety and reliability of the cleaning process.SAFETY AND RELIABILITY GUARANTEE: Strict safety standards are followed in the design and manufacturing process, and high-quality materials and manufacturing processes are used. During the cleaning process, the machine can precisely control the amount of cleaning agent and the cleaning time to ensure that it will not cause any damage to the injector nozzles. Technical Parameters: Time: 0～20min Cleaning Frequency: 40 kHz Cylinder Volume: 140 ml Tank Capacity: 1300 ml Range Of Rotation: 0-7500r/min PWM Pulse Width: 0～20.0ms step0.1ms Injection Times: 0～9900 times, step 100ms System Pressure: 0～0.6Mpa Ultrasonic Cleaning Power: 70W Package Dimensions: 340*295*360mm Power Supply: AC 110/220V±10% Working Frequency: 50HZ±0.5 Relative Humidity: <85% Environment Temperature: 0℃～＋40℃ External Magnetic Field Strength: <400A/m MRCARTOOL V308 Injector Heating Cleaner has an intelligent diagnostic system that detects the working status of four-cylinder engine injectors. The cleaner accurately determines whether the injector nozzle is clogged or carbonized through precise data analysis and provides guidance for the cleaning operation. This makes the cleaning process more targeted and avoids unnecessary operation and time waste.Function: Uniformity/Sprayability Test: Under this function, the parameters of RPM, PW and time can be adjusted in real time. Leakage Test: Under this function, the parameter of fuel pressure can be adjusted in real time. Injecting Flow Test:Under this function, the parameter of fuel pressure can be adjusted in real time. Auto mode Test: Under this function, the parameter of fuel pressure can be adjusted in real time. Humanization Control Panel 1. Working parameter display 2. Start/Pause/Stop 3. Function selection 4. Pressure AdjustmentUltrasonic Cleaning The Fuel Injector Diagnostic Machine can perform ultrasonic cleaning on single or multiple injectors simultaneously, which can eliminate thoroughly blockages on the injector accessories and internal.Heating The Cleaning Fluid The fuel injector tester is able to heat the cleaning fluid in the cleaning tank, which can improve the cleaning effect on injectors.Recovery Cleaning Fluid The injector cleaning machine used cleaning fluid and testing fluid can be easily recovered.Wide Compatibility The injector cleaner machine supports most of the cars and motorcycles among the market.Muti Test Function ldle Speed Test Medium Speed Test High Speed Test Accelerating Test Variable Speed Test Leakage Test ldle Spray Volume Medium Spray Volume High Spray Volume Unit Info Application:Support for Audi，for Australia Ford，for Benz，for BMW，for Brilliance，for Chevrolet，for Chevy，for Chrysler，for Citroen，for Dacia，for Dadi，for Daewo，for Daihatsu，for Demo，for Fiat，for Ford，for GM，for Holden，for Honda，for Hyundai，for Isuzu，for Jaguar，for Kia，for Lancia，for Land Rover，for Mahindra，for Maruti，for Mazda，for Mitsubish，for Nissan，for Opel，for Peugeot，for Porsche，for Renault，for Romeo，for Rover，for Saab，for Seat，for Skoda，for Smart，for Subaru，for Suzuki，for Tata，for Toyota，for Volvo，for VW，for Yamaha.Package Include:1pcs * V308 cleaning machine1pcs * Oil Separator1pcs * Funnel2pcs * Pulse Signal Cable1pcs * Cleaning Fluid Drain Valve2pcs * Fixing Bolt4pcs * 14mm Cleaning Connector4pcs * 17mm Cleaning Connector4pcs * Washer3pcs * Plug4pcs * Sealing Ring1pcs * Ultrasonic Cleaning Cover1pcs * Ultrasonic Cleaning Bracket1pcs * Power Cable1pcs * V308 User ManualThis device is designed for testing fuel injectors to identify potential issues such ass tucking leakage or damage.It features six testing modes, allowing users to choose the appropriate mode for injector testing based on their specific requirements.Additionally， it can be used in conjunction with a fuel injector machine.Operating Steps 1 Connect the adapter terminal to the fuel injector 2.Insert the injector into to the the adapter fitting 3.Choose the testing mode and press the Start button. 4.Press the injector on to the nozzle of the carb cleaner and observe the spray status of the injectorAdaptable Withvarious Fuel Injectors It is equipped with two types adapter fttings for connecting both injectors and carb cleaner.Gompatible With Injector Cleaner Machine It enhances the cleaning and testing of fuel injectors on other Injector Cleaner Machines by delivering pulse signalsProduct Specifications Input Power：DC12V OperatingEnvironment：0℃ to 40℃， Relative Humidity≤80% Storage Environment：-20℃to 50℃， Relative Humidity≤85% Testing Modes Test Mode1： Generates a 100-millisecond wide pulse every 1 second, continuously outputting pulses to the fuel injector. During testing, the sound of the injector's action should be audible.Use a multimeter to measure oltage fluctuations in the injector electrode.The digital display shows the continuous testing time in minutes. ·Test Mode2：Outputs 100 pulses with each puls ehaving a width of 5 milliseconds.Observe the fuel injector during testing and the digital display shows the number of consecutive test pulses. Test Mode3: Outputs 1000 pulses with each pulse having a width of 3 milliseconds.Observe the fuel injector during testing, and the digital display shows the number of consecutive test pulses. Test Mode4：Simulates an idle state by continuously outputting pulses to the fuel injector.The digital display shows the continuous testing time in minutes. Test Mode5：Simulates a medium-speed state by continuously outputting pulses to the fuel injector. The digital display shows the continuous testing time in minutes. Test Mode6：Simulates a high speed state by contin uously outputting pulses to the fuel injector. The digital display shows the continuous testing time in minutes. Press the mode selection button continuously until the display shows the character"C 231"， indicating the current version number of the instrument. LieferdetailsRückgaberechtTerms of salesKontaktieren Sie unsZahlungLieferdetailsWir versenden nach Ihrer EBAY-Adresse, aber es tut uns leid, dass wir nicht akzeptieren können P.O.BOX-Adresse. Bitte stellen Sie sicher, dass sie korrekt ist. Dies wird helfen, Ihr Produkt sicher und schnell erhalten werden! 2. internationale Käufer bitte beachten: 1) Bitte erkundigen Sie sich bei der Zollbehörde Ihres Landes, um festzustellen, wie hoch die zusätzlichen Kosten fÜr die Einfuhrzölle vor dem Bieten/Kaufen sind. 2) Es liegt in der Verantwortung des Käufers, die Abfertigung abzuschließen, wenn das Paket Ihren Zoll erreicht. Wir sind nicht verantwortlich fÜr die lokalen Steuern des Käufers, bitte konsultieren Sie die lokalen Zollbehörden fÜr Steuerdetails. Zollsätze variieren von Land zu Land, bitte verstehen Sie. 3. Wenn Sie weitere Fragen haben, zögern Sie bitte nicht, uns eine E-Mail zu schicken. Dankeschön RückgaberechtBitte senden Sie den Artikel innerhalb von 30 Tagen nach Erhalt zurÜck, wenn Sie mit Ihrem Kauf nicht zufrieden sind. alle RÜcksendungen mÜssen im Originalzustand sein, bitte mailen Sie uns zuerst fÜr die RÜcksendeadresse und AnweisungenTerms of salesWir sind seit vielen Jahren in der Kfz-Reparaturwerkzeugindustrie tätig und unser Unternehmen wurde gegrÜndet, um vertrauenswÜrdig zu sein. Mit Lagern und genÜgend Waren in Deutschland, USA, Großbritannien, können wir Ihnen eine schnelle Lieferung von Paketen und einen exzellenten Service zusichern! Kontaktieren Sie unsWir engagieren uns fÜr Ihre Zufriedenheit nach Ihrem Kauf. Wenn Sie mit Ihrem Kauf in irgendeiner Weise nicht zufrieden sind, geben Sie uns bitte die Möglichkeit, es zu versuchen und es richtig zu machen, bevor Sie ein Feedback hinterlassen.Wir werden Ihre Fragen innerhalb von 1 Werktagen beantworten. Kundenservice-Zeiten: M-F: 9:30AM - 18:00PM BST (Beijing Standard Time)Zahlung1. Wir akzeptieren PayPal, Kreditkarten (Visa, Eurocard / MasterCard, Amex und Switch oder Visa / Delta) Zahlungen können NUR Über EBAY akzeptiert werden. 2. Andere Zahlungsmethoden (BankÜberweisung, Scheck usw.) sind NICHT akzeptabel! 3. Bitte machen Sie die Zahlung innerhalb von 3 Tagen
Price: 29.99 USD
Location: Bordentown, New Jersey
End Time: 2024-09-28T05:47:28.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
Brand: MRCARTOOL
OBD Interface: CAN, EOBD, OBD, OBDII
Type: Injector Cleaner Tester
Supported System: Injector System
Vehicle Type: Passenger Vehicle, Motorcycle
Country/Region of Manufacture: China
Fuel Type: Gasoline
Weight: 10kg
Features: Ultrasonic Cleaning, 6-Cylinder Injector Test
Application: Car GDI injector cleaner tester
Voltage: 110V±10%
Frequency: 50HZ±0.5
Relative Humidity: <85%
Fuel Tank Capacity: 2000ml
Cylinder Volume: 140ml
RPM Range: 0～7500 r/min
Ultrasonic Cleaning Power: 70W
Ultrasonic Cleaning Frequency: 40KHZ±0.5 KHZ
Warranty: 3 Year
Engine Type: Gasoline
Type2: direct injection Injector Cleaner & Tester
Typ3: high pressure injection Injector Cleaner & Tester
Manufacturer Part Number: V310 V309 V308 V30
Available Variations
Color: V310
Price: 499 USD
Available Quantity: 50
Quantity Sold: 4
Color: V309
Price: 429 USD
Available Quantity: 50
Quantity Sold: 0
Color: V308
Price: 269 USD
Available Quantity: 50
Quantity Sold: 1
Color: V30
Price: 29.99 USD
Available Quantity: 51
Quantity Sold: 2
